3D hydraulics simulator
Hydraulics simulator on a 3D training workstation
A hydraulic power unit on its side stand, a profile plate with drip tray, and the valves and cylinders you know from the lab — simulated with real pressures and flows.

Hydraulic components
Supply
Hydraulic power unit with tank, gear pump, relief valve and gauge; distributor with self-sealing couplings; accumulators.
Directional valves
4/2 and 4/3 valves (hand lever and solenoid) with closed, tandem, float and A→T centre positions.
Pressure and flow
Pressure relief, reducing and sequence valves, counterbalance and check valves, throttles and flow control valves, cartridge valves.
Actuators
Double-acting, single-acting and double-rod cylinders, hydraulic motors.
Example circuits
- Hydraulics · 4/3 hand lever valve — Power unit, distributor with gauge, closed-centre 4/3 valve and flow control on the extend line. Click the lever.
- Electrohydraulics · 4/3 solenoid valve — S2 drives Y1 (extend), S3 drives Y2 (retract). Without a signal the valve centres and the cylinder stops where it is.

Frequently asked questions
Can I simulate a hydraulic circuit online for free?
Yes. Open the hydraulics workstation from New project and use the Free plan — all components are available.
Does the simulator model relief valves and pump flow?
Yes. The engine computes pressures and flows; for example it warns when the relief valve is open and all pump flow returns to tank.