Mechatronics
Mechatronics workstation: air, oil and electrical control together
Real machines mix technologies. The combined workstation puts a pneumatic plate and a hydraulic plate side by side with one electrical control circuit.

Choose your workstation
Pneumatics & Electropneumatics
One profile plate, air service unit, distributor and electrical rack.
Hydraulics & Electrohydraulics
Profile plate with drip tray, hydraulic power unit and electrical rack.
Combined · Mechatronics
Two plates — air on the right, oil on the left — sharing one electrical rack.
Example: pneumatic clamp, hydraulic press
- Mechatronics · pneumatic clamp, hydraulic press — Combined workstation. Switch S1 on: the pneumatic cylinder clamps the part; its end-position sensor energises the 4/2 solenoid valve and the hydraulic cylinder presses. S1 off: both return.
Industrial machine views
- Magazine feeder
- Clamping fixture
- Embossing press
- Lift and transfer station
- Stamping and ejecting station
- Clamping and drilling station

Build your first circuit in two minutes — free, in the browser.Open the 3D workbenchPlans and pricing